by If you’re having trouble with your Apple Airpods or Airpods Pro, you may need to reset them. Here’s how: First, make sure that your Airpods are in their charging case and that the case has power. If not, charge your Airpods for at least 15 minutes before proceeding.
Next, press and hold the setup button on the back of the charging case for about 15 seconds until you see the status light flash white. Once it does, release the button and then open your Airpods case lid. You should now see a popup on your iPhone asking if you want to connect to “AirPods.”
Tap Connect and wait a few seconds for the connection to be established.
- Put your AirPods Pro in their case—making sure that the lid is open
- Press and hold the setup button on the back of the case for approximately 15 seconds until you see the status light flashing white
- Once the status light begins flashing white, release the button and then close the lid of your AirPods Pro case
- Your AirPods Pro are now reset and ready to be re-paired with your device
How to Reset Airpods
If you’re having trouble with your AirPods, or just want to start fresh, you can reset them to their factory default settings. Here’s how:
First, make sure your AirPods are in their case and that the case is charged.
Then, open the lid and press and hold the setup button on the back of the case for about 15 seconds. You’ll see a white light blink three times, followed by a blinking amber light.
Once your AirPods have reset, they will no longer be connected to any of your devices.
You’ll need to reconnect them using Bluetooth as if they were new headphones.
How to Reset Airpod Pro
If you’re having trouble with your AirPods Pro, there are a few things you can try to reset them. First, make sure that your AirPods Pro are in their case and that the case is charged. Then, press and hold the setup button on the back of the case for at least 15 seconds.
This will reset your AirPods Pro and clear any paired devices from their memory. If this doesn’t work, you can also try resetting your AirPods Pro by connecting them to a power source using the Lightning cable that came with them. Once they’re connected, press and hold both the volume down button and the multifunction button for at least 8 seconds.
This should force a restart of your AirPods Pro and clear any issues you were having.
How to Reset Airpods Pro Without Phone
If you’re like me, you love your AirPods Pro. They’re the perfect way to stay connected while working out or traveling. But sometimes, they need a little reset.
Here’s how to do it without your phone:
1. Put your AirPods Pro in their case and make sure that the lid is open.
2. Press and hold the button on the back of the case for about 15 seconds until you see the LED light flash white.
3. That’s it! Your AirPods Pro are now reset and ready to use again.
How to Reset Airpods 3
If you’re having trouble with your AirPods, sometimes restarting them can help. Here’s how to reset your AirPods 3:
1. Make sure that your AirPods are in their case and that the case is charged.
2. Press and hold the setup button on the back of the case for about 15 seconds, until you see the status light flash amber a few times and then flash white.
3. Once your AirPods have reset, they will automatically reconnect to your iPhone or iPad. If they don’t, just open the lid of the case and hold them close to your device until you see the “Connected” message appear onscreen.
Airpods Won’T Reset Or Connect
If you’re having trouble connecting your AirPods to your iPhone, iPad, or iPod touch, or if they disconnect during use, follow these steps.
First, make sure that your AirPods are in their case and that the case has power. If you can see a green light on the front of the case, that means the AirPods are charged.
Next, check to make sure that your AirPods are turned on. You can do this by opening the lid of the case and looking for a white light on the inside. If you don’t see a white light, press and hold the button on the back of the case for about 15 seconds until you see a white light.
Once your AirPods are turned on, try connecting them to your device again. If they still won’t connect, reset them by pressing and holding the button on the back of their case for about 15 seconds until you see a orange light (indicating that they’re in pairing mode). Then open Bluetooth settings on your device and look for “AirPods” under Other Devices.
How Do I Reset My Airpods With Two Different Airpods?
If you have two different AirPods, you can reset them by following these steps:
1. Put both AirPods in your charging case.
2. Make sure that your charging case has a charge.
If it doesn’t, plug it in to an outlet using the Lightning cable that came with your case.
3. Press and hold the setup button on the back of the charging case for at least 15 seconds. The status light should flash white, then amber, and finally red before returning to white.
4. If one or both of your AirPods are still connected to your iPhone or another device, they’ll need to be disconnected from those devices before they can be reset. To do this, go to the Bluetooth settings on those devices and look for the “Forget This Device” option for each AirPod that’s still connected.
5. Once both AirPods are reset and disconnected from any other devices, you can begin using them again by following the usual pairing process (pressing and holding the setup button on the back of the charging case until you see a white flashing light).
How Do I Manually Reset My Airpods Pro?
If you’re looking to manually reset your AirPods Pro, there are a few different ways you can do it. Here’s a step-by-step guide on how to reset your AirPods Pro:
1. First, make sure that your AirPods Pro are turned off.
If they’re not, simply press and hold the button on the back of the case for about 15 seconds until the status light turns off.
2. Once they’re turned off, open up the case lid and then press and hold the button on the back of the case for about 30 seconds. You should see the status light turn white during this time.
3. After 30 seconds have passed, close the lid of the case and then open it back up again. Press and hold the button on the back of the case for another 5 seconds or so. You should see that same white status light turn amber, signifying that your AirPods Pro have been reset successfully!
How Do I Remove an Old Owner from Airpods Pro?
If you have AirPods Pro that were previously owned or used by someone else, you may want to remove the old owner’s information from them before using them yourself. Here’s how to do that:
1. Put your AirPods Pro in their charging case and make sure that both the AirPods Pro and the case are charged.
2. Open the lid of the charging case and hold down the button on the back of the case for about 15 seconds until you see the status light flash white three times. This will reset your AirPods Pro and clear any existing pairing information.
3. Now open up your iPhone or iPad’s Settings app and go to “Bluetooth.”
You should see your AirPods Pro listed under “My Devices” as “AirPods (Resetting).” Tap on this entry to select it.
4. On the next screen, tap on “Forget This Device” at the bottom.
Confirm when prompted and then close out of Settings when you’re done.
Your AirPods Pro are now ready to be used with a new device or owner!
Can Airpods Pro Be Reset If Stolen?
Yes, AirPods Pro can be reset if stolen. To do this, you’ll need to go into your iCloud account and select the “Find My iPhone” feature. From there, you can select your AirPods Pro from the list of devices and click “Erase Device.”
This will erase all data from your AirPods Pro, making them useless to the thief.
How To Reset your Apple AirPods Pro – Hard Reset
Conclusion
If you’re having trouble with your Apple Airpods or Airpods Pro, you may need to reset them. Here’s how:
First, make sure that your Airpods are charged and in their case.
Then, open the lid of the case and hold down the button on the back for about 15 seconds. If you see a white light flashing, that means your Airpods have been reset and are ready to use.
If you’re still having issues with your Airpods, you can try factory resetting them by putting them in their case, opening the lid, and holding down the button on the back for about 30 seconds.
You should see a orange light flashing when they’rereset.
